Help in weighing the tarp down
In the first step, using a chain saw, chop off the stump down as close to the ground as possible. See that the chain teeth do not come into contact with the mud as this can rust the chain saw.Cut holes a few feet deep into the stump in a good number of places, using the broadest drill bit. The wider the holes, the the faster it will work.Fill these holes first with water, and then with nitrogen containing fertilizer. For example, you could use cattle manure. In case you use a commercial fertilizer instead, ensure that the 1st of the 3 numbers of the NPK is the highest.Soak the ground all around the stump. Cover the stump with the help of a polymer sheet. The tarp acts as a barrier retain water in and around the tree stump. Moisture content is very effective in removing the stump.Spread an organic mulch over the polythene cover, and pour water over it regularly. It will hold additional water content, Atlanta Tree Trimming and keep the area more wet. Wet mulch is also heavy, which will help in weighing the tarp down, so that it doesn’t get blown. For additional weight, roll some heavy rocks on the sheet.The final step you have to remove the stump is to let it stay for sometime. You are speeding up the natural process of decomposing by using the steps mentioned above, but this technique is still not for fast results.You can decrease the time required for complete removal, by periodically removing the soil and tarp for a moment and again thoroughly soaking the stump and the ground around it.
